• Nyzhnodniprovska Street, 8
    Ukraine, 69091 Zaporizhzhia
  • +38 (067) 225-65-55
    info@etm.io

Software and hardware device to set the pace of rolling NTLS-1680

The control system is based on industrial controller for harsh environments made by Schneider Electric...

AUTOMATED CONTROL SYSTEM OF A SHIFT TASK COMMUNICATING

Automated control system of a shift task communicating (64-bit code) for Welding shop...

Automated control system of railway wheel rim hardness measurement node

Railway wheels are in the list of the most critical elements of the rolling stock of the rail transport...

Automated control system of the fish processing unit

Due to sterilization, canned food can be stored for a long period of time...

Automatic control system of a cell-type cooling tower

The cooling tower is a device for cooling a large amount of water by directed air flow...

Automatic control system of the vacuum-ammonium drying section

To form a ceramic shell the refractory coating is subjected to air, air-ammonia and ammonium-vacuum drying...

AUTOMATION OF BODY TRANSFER SYSTEM AT THE BODY FINAL ACCEPTANCE LINE

Body transport conveys different bodies from the rotating table of a skid transport system...

Boiler automation for biofuel combustion (sunflower husks)

Boiler is designed to provide plant technological system with the steam...

Electrical diagnostics system of the winder unit of hot-strip steel rolling plant

The winder unit of hot-strip steel rolling plant has been designed for production of steel cross-section strip

Fodder production line management system

Combined feed (fodder) is a homogeneous mixture of forage resources...

Grain reception, storage, processing and preparation complex automation

Automated grain reception, storage, preparation and processing complex consists of several branches...

Hardware-software complex of measuring relative rolling mill 1700-1(2) strip compression

Temper rolling is carried out to improve the surface of the steel, and to produce surface hardening...

Mobile system for remote monitoring and control

Today, an important criterion of any enterprise is the ability to provide information on the results of its work...

Oil extraction plant automation

The plant is designed to operate on two types of feedstock - sunflower seeds and soybeans, in this regard, the technological process at certain stages forks.

Remote control system of cylinder oxygen filling on the water ramps

Nowadays oxygen has wide application in metallurgy, chemical, petrochemical, pulp and paper, food industries, power engineering, medicine and agriculture...

SCADA-system of aeration device

Transloading of bulk materials is the most common operation in processing of mineral raw materials...

SCADA-system the chemical water treatment line

Production of semiconductor silicon requires purified water with low content of suspended solids...

Software and hardware complex of controlling «Quarto» measure cut machine

The complex is intended for day and nightautomatic control of mechanisms and electrical equipment of measure cut machine.

Software and hardware conveyor control complex

Our team has developed and implemented hot rolled coil conveyor process control system for thin-sheet hot rolling mill, JSC "Zaporizhstal".

System diagnostics of bell-type furnaces thermal separation

Main indicator of metallurgical production is quality of the products.

The automated control system of the unit of the measuring cut of steel strip.

The unit of the measuring cut is a part of the technological chain of the machine PGA 1-4x400-1500 includes...

The control system of sand-throwing machine PN-40

In a case of batch production, large-scale and mass production of castings to improve the quality...

The hardware-software complex of controlling of on-off cull ejector of the cross-cutting machine APR-1

Round the clock automatic control of mechanisms and electrical equipment of the ejector in order to provide the functions of sorting second-class sheets and accounting products

The packing band cutting machine control system

The purpose of the automatic cutting machine control system is to obtain economic benefit

The speed modes convolution machines control system

Convolutional machines are intended for coiling the strip by bending the band between the rollers.